High - Performance Excavator Hydraulic Gear Pump HKP30.34 for SDLG 500/600
In the realm of construction machinery, where efficiency, reliability, and durability are non - negotiable, the Excavator Hydraulic Gear Pump HKP30.34 designed for SDLG 500/600 excavators emerges as a true engineering marvel. This pump is not just a component; it's the heart that pumps life into these powerful excavators, enabling them to conquer the most challenging construction tasks with ease.
Unparalleled Efficiency
The HKP30.34 is engineered to deliver exceptional efficiency. With a displacement of [X] cc per revolution, it can generate a substantial flow rate of [X] L/min at a rotational speed of [X] RPM. This high - flow output ensures that the SDLG 500/600 excavators can complete tasks in record - time. For instance, in a large - scale building project, the excavator equipped with the HKP30.34 can dig and load a standard - sized dump truck in just [X] minutes, which is [X]% faster than with a conventional pump. This increased efficiency directly translates into cost savings for construction companies, as they can complete projects more quickly and move on to the next job.
Moreover, the pump's high - pressure capabilities are equally impressive. It can withstand a maximum working pressure of [X] MPa, allowing the excavator to break through the toughest materials, such as solid rock or reinforced concrete. The stable pressure output ensures that the excavator's movements are precise and controlled, even when working under extreme loads. This precision is crucial in tasks like delicate demolition work or the excavation of deep and narrow trenches.
Durability Built to Last
Constructed with high - quality materials, the HKP30.34 is built to endure the harshest construction environments. The gears are made from high - strength alloy steel that has been heat - treated to achieve exceptional hardness and wear resistance. This ensures that the gears can withstand the high - stress and high - speed operation of the pump without significant wear or deformation. The pump housing is fabricated from a corrosion - resistant material, which can withstand exposure to moisture, dust, and chemicals commonly found on construction sites.
In addition, the HKP30.34 is equipped with a state - of - the - art sealing system. The seals are designed to prevent hydraulic fluid leakage, even under high - pressure conditions. This not only ensures the proper functioning of the pump but also extends its lifespan by reducing the risk of contamination and damage to internal components. The use of high - quality bearings further enhances the pump's durability, as they can support the high - speed rotation of the gears while minimizing friction and vibration.
Easy Installation and Maintenance
We understand that time is money in the construction industry. That's why the HKP30.34 is designed for easy installation. It comes with a standard mounting interface that is fully compatible with the SDLG 500/600 excavators, allowing for quick and hassle - free replacement. The installation process can be completed by a trained technician in just [X] hours, reducing the downtime of the excavator.
Maintenance of the HKP30.34 is also straightforward. The pump is designed with easily accessible ports for oil filling, draining, and sampling. The internal components are arranged in a modular way, making it convenient for technicians to perform routine maintenance tasks such as gear inspection, seal replacement, and bearing lubrication. Regular maintenance can be carried out in accordance with the provided maintenance manual, ensuring the long - term reliability and optimal performance of the pump.
12 - Month Warranty
We are confident in the quality of the HKP30.34. That's why we offer a 12 - month warranty. During this period, if any quality - related issues occur, our dedicated after - sales team will provide prompt assistance. We will offer free repairs or replacements, ensuring that our customers can use the HKP30.34 with complete peace of mind. Our commitment to customer satisfaction doesn't end with the sale; we are here to support you throughout the lifespan of the product.
Applications Galore
The HKP30.34 is suitable for a wide range of applications. In large - scale infrastructure projects, such as the construction of highways, bridges, and airports, it powers the SDLG 500/600 excavators to perform tasks with precision and speed. In mining operations, it enables the excavators to extract minerals from the earth efficiently. It is also widely used in urban construction projects, where it helps in the excavation of building foundations, the demolition of old structures, and the construction of underground utilities.
In conclusion, the Excavator Hydraulic Gear Pump HKP30.34 for SDLG 500/600 is a high - performance, reliable, and user - friendly product. With its exceptional efficiency, durability, easy installation and maintenance, and 12 - month warranty, it is the ideal choice for excavator owners and operators who are looking for a top - quality hydraulic gear pump to enhance the performance of their SDLG 500/600 excavators. Whether you're working on a small - scale renovation project or a large - scale industrial development, the HKP30.34 is the perfect companion for your excavator.
| Pump |
| Product Name |
Gear Pump |
| Model NO. |
HKP3034 |
| Material |
Cast iron(Front iron;rear aluminum) |
| Rotate Direction |
Right |
| Pressure |
26bar |
| Speed |
3000rpm |
| Application |
Excavator |
| Seals |
FKM |
| Operating temperature |
80ºC |
| Weigh |
11.8KG |
| Specification |
173*154*265 |
| Delivery cycle |
7Days |
| Minimum quantity |
1 |
| Warranty period |
12 months |
| Quality standard |
CE/ISO9001 |
| condition |
Brand-New |
| Control Mode |
Fluid |
| Flow |
35ml+10/min |
| Remarks |
For SDLG 500/600 |
| Installation hole pitch A |
138 |
| Installation hole pitch B |
|
| Hole diameter*number of holes |
Φ15*2 |
| Rabbet Diameter |
Φ101.6 |
| Rabbet height |
8 |
| Output shaft diameter |
Φ21.8 |
| Shaft length |
34 |
| Number of spline teeth |
13 |
| Flat key size |
|
| Total height |
173*154 |
| Total length |
265 |
| Oil inlet |
58.7*30.2-Φ32 |
| High-pressure oil port |
47.6*22.2-Φ20 |
| Oil drain port |
|
| Tapered shaft size |
U7/8
Oil outlet of small gear pump-U7/8 |
| Remarks |
|
| Other configurations |
|
FAQ
Q: How to guarantee the same?
A: Before sending, I will take pictures. After confirmation, I send.
Q: When to ship?
A: Once getting payment then arrange.
Q: Import customs fee?
A: It depends on import country. I can make lower valve so that you can pay lower customs fee even no need to pay.
Q: How long for transport?
A: For express/ air, it takes about 5 days. For land/ sea, it takes about one month. It depeds on your address.
Q: Product usage?
A: If any problem about usage, I will solve at first time.
Q: What Is The Payment Terms?
A: Full order: 30% as deposit, the balance before shipment:
Small order /sample order: full payment in advance.
Q: Can I Mark My Own Brand On The Pump?
A: Yes. Full order can mark your brand and code.
Q: How Long Is Guarantee?
A: We give 1 year guarantee.
Our product range primarily focuses on brand-new fan pumps, fan motors, and travel motors for excavators. These components are meticulously crafted using advanced manufacturing techniques and premium materials. Each piece undergoes rigorous quality control procedures throughout the production process to ensure optimal performance and durability.One of the key highlights of our service is the provision of a 12-month quality guarantee for customers worldwide. This commitment reflects our confidence in the reliability of our products. We understand the importance of minimizing downtime in the construction and heavy machinery sectors, and our quality assurance aims to give our clients peace of mind when using our equipment.
| Excavator PC200-3,PC200-5,PC200-6,PC200-7,PC200-8 Hydraulic Main Pump Parts |
| PC220-5,PC300-5,PC300-6,PC300-7,PC400-5 |
| PC60-3,PC60-5,PC100-3,PC100-5,PC120-3,PC120-5,PC200-1,PC220-1,PC150-1,PC220-3 |
| PC210-6,PC220-6,PC220-7,PC300-3,PC400-3,PC400-5,PC400-6 Hydrauic Main Pump Parts |
| Hydraulic Main Pump Assembly |
| K3V112DTK/K5V140DTK of 6LOO type Regulator ; Interchangeable PC200-3 & 5 |
| K3V112DTK/K5V140DTK of load sensing control type Regulator ; Interchangeable PC200-6 |
| K3V112DTK/K5V140DTK of load sensing control type Regulator ; Interchangeable PC200-7 & 8 |
| Hydraulic Pump Spare Parts |
| HPV35,HPV71,HPV75,HPV90,HPV95,HPV100,HPV132,HPV140,HPV160,HPV165,KPV90,KPV105,KPV90,KPV90 |
| KMF41,KMF125 |
| REXROTH SERIES HYDRAULIC PUMP /MOTOR |
A4V40; A4V56; A4V71; A4V125; A4V250; A4VFO28; A4VSO40; A4VSO71; A4VSO125; A4VSO180; A4VSO250; A4VSO355; A4VSO500; A4VF500 /
A4F500; A4VG28 (A4F028); A4VG50;; A4VG40; A4VG45 A4VG56; A4VG71; A4VTG71; A4VG90 (A4VT90HW / 32R); A4VHW90; A4VTG90 charge pump
(Laid thick); A4VG125; A4VG125 Charge pump; A4VG125 charge pump (general use type); A4VG125 charge pump (A10VO28 string type); |
|
|
|
| Rexroth Bent Axis Pump Series |
A2F5;A2F12;A2F23;A2VK28;2VK28;A2F28;A2F55;A2F80;A2F107;A2F160;A2F200;
A2V225;A2F250;A2V500;A2V915;A2F355;A2F500;A2F1000;A2FO10;A2FO12;A2FO16;A2FO23;A2FO28;A2FO32;A2FO45; A2FO56; A2FO63; A2FO80; A2FO90
/ A2FE90; A2FO107; A2FO125 (A2FM125); A2FO200;; A2FO160; A2FO180 A2FO250; A2FO500; A6V28; A7V55 / A8V55; A7V58; A7V80 / A8V80;
A7V107 / A8V107; A7V160 / A8V160; A7V200; A7V225 ; A7V250; A7V355; A7V500; A6VM / A7V1000; A6VM / A7VO12; A7VO28; A7VO55; A7VO80;
A7VO107; A7VO160; A6VM160; A6VE160; A6VM200; A6VM500; A7VO172; A7VO200; A7VO250; A7VO355; A7VO500. |
|
|
|
|
|
| Our Product Range |
Hydraulic Pump Parts |
| Hydraulic pump parts |
Cylinder block |
Press pin |
| Piston motor |
Piston shoe |
Snap ring |
| Piston pump |
Retainer plate |
Coil spring |
| Gear pump |
Ball guide |
Disk spring |
| Charge pump |
Valve plate |
Barrel washer |
| Pilot pump |
Shoe plate |
Oil seal |
| Vane pump |
Bearing plate |
Frication plate |
| Repair OEM parts |
Swash plate |
Steel plate |
| Motor spare parts |
Drive shaft |
Metal |
Audited Supplier 
){kind=link}